Product Description
Carbide End Mill Bits High Cutting Speed WF25 or K40 Raw Material Fundable
Advantage
Our Solid Tungsten Carbide End Mills with 4 flutes are used for general milling applications including cutting slots, profiling and routing, and will produce a sharp edge at the bottom of the slots and pockets of the workpiece.
These end mills are 4 flute, non-centre cutting end mills. Ideal for steel, cast iron, non-ferrous metals, alloys, brass, and non-metallic materials. Harder, rigid, and more wear-resistant than HSS, Carbide end mills are extremely heat-resistant and used for high-speed applications on some of the hardest materials such as cast iron, non-ferrous metals, alloys and plastics.
Specifications
E550MAX general processing milling cutter series adopt domestic high-quality fine grain tungsten steel material. Flexural strength: 4100mpa, grain size: 0.6 μm, with TiAlN-nano coating imported from Switzerland. The cutter is designed with special angle, especially suitable for carbon steel, alloy steel, pre-hardened steel and other materials processing.With high precision quality control, and full inspection, all E550MAX series end mills are delivered with 100% qualification rate.
| Raw Material |
WF25 / K40 |
| WC |
88% |
| Co |
12% |
| TRS |
>4100N/mm2 |
| Hardness |
>92HRA |
| A.O.L |
50mm-150mm |
| Grain size |
0.6 μm |
| Upto |
HRC58 |
| Flutes No |
4F |
| Coating |
TiAlN-nano |
| Suitable for |
Steel,stainless steel,nickel alloy,Titanium alloy,cast iron,plastic and other materials |
Coating:
| Item |
TiAlN-nano |
| Hardness(HV): |
2800 |
| Thickness(μm): |
2.5-3 |
| Oxidation Temp(°): |
800 |
| frictional Coefficient: |
0.3 |
| Color: |
Violet |
Standard Sizes
| Size |
Flute Length of End Mills(mm) |
| Flat end |
Ball Nose |
Round nose |
| D1*D4*50 |
3 |
2 |
3 |
| D1.5*D4*50 |
4 |
3 |
4 |
| D2*D4*50 |
5 |
4 |
5 |
| D2.5*D4*50 |
6 |
5 |
6 |
| D3*D4*50 |
8 |
6 |
8 |
| D3*D3*50 |
8 |
6 |
8 |
| D3.5*D4*50 |
9 |
7 |
9 |
| D4*D4*50 |
10 |
8 |
10 |
| D1*D6*50 |
3 |
2 |
3 |
| D1.5*D6*50 |
4 |
3 |
4 |
| D2*D6*50 |
5 |
4 |
5 |
| D2.5*D6*50 |
6 |
5 |
6 |
| D3*D6*50 |
8 |
6 |
8 |
| D3.5*D6*50 |
9 |
7 |
9 |
| D4*D6*50 |
10 |
8 |
10 |
| D6*D6*50 |
13 |
10 |
13 |
| D6*D6*50 |
15 |
12 |
15 |
| D7*D8*60 |
17 |
14 |
17 |
| D8*D8*60 |
20 |
16 |
20 |
| D10*75 |
25 |
20 |
25 |
| D12*75 |
30 |
24 |
30 |
| D14*100 |
45 |
28 |
35 |
| D16*100 |
45 |
32 |
40 |
| D18*100 |
45 |
36 |
40 |
| D20*100 |
45 |
40 |
40 |
|
Flute Length of Extended End Mills(mm)
|
| D3*D4*75 |
12 |
6 |
12 |
| D4*D4*75 |
16 |
8 |
14 |
| D5*D6*75 |
18 |
10 |
15 |
| D6*D6*75 |
24 |
12 |
20 |
| D8*75 |
25 |
16 |
25 |
| D3*D4*100 |
12 |
6 |
15 |
| D4*D4*100 |
20 |
8 |
15 |
| D5*D6*100 |
20 |
10 |
20 |
| D6*D6*100 |
30 |
12 |
25 |
| D8*D8*100 |
35 |
16 |
30 |
| D10*100 |
40 |
20 |
30 |
| D12*100 |
45 |
24 |
35 |
| D6*D6*150 |
45 |
12 |
40 |
| D8*D8*150 |
50 |
16 |
45 |
| D10*150 |
55 |
20 |
50 |
| D12*150 |
55 |
24 |
55 |
| D14*150 |
60 |
28 |
60 |
| D16*150 |
70 |
32 |
65 |
| D18*150 |
70 |
36 |
70 |
| D20*150 |
70 |
40 |
70 |
The process of production:
1. Order entry business arrangements, then prepared the raw material, sent to engineer to drawing.
2. The grinding to flat head and chamfering, or taper of the angle.
3. Inspector test the diameter, length, taper angle and tolerance of the material, then lasering.
4. Go to CNC machine working. Some time check the cutter when it producing.
5. Inspector test all of when the cutters finished.
6. If the cutters no need to coating, then we will package it sent to customer. If the cutters need to coating, we package it sent to coating.
7. After coating back, inspector will check it. Then sent to customer.
Your message must be between 20-3,000 characters!