Product Description
T-Slot End Mill T Slot Milling Cutter CNC Lathe Carbide End Mill CNC End Mill Bits
T-Slot Milling
Cutting T-slots in a workpiece holding device is a typical milling operation. The size of the T-slots depends upon the size of the T-slot bolts which will be used. Dimensions of T-slots and T-slot bolts are standardized for specific bolt diameters.
Selection of Milling Cutters
Two milling cutters are required for milling T-slots, a T-slot milling cutter and either a side milling cutter or an end milling cutter. The side milling cutter (preferably of the staggered tooth type) or the end milling cutter is used to cut a slot in the workpiece equal in width to the throat width of the T-slot and equal in depth to slightly less than the head space depth plus the throat depth). The T-slot milling cutter is then used to cut the head space to the prescribed dimensions.
Specifications
T550 T-Slot milling cutter series adopt domestic high-quality fine grain tungsten steel material, flexural strength: 4100mpa, particle size: 0.8 μm. There are two categories for aluminum and steel respectively. T-Slot milling cutter for steel is coated by imported coating equipment (black / copper), specially suitable for aluminum, copper, ordinary medium and low carbon steel, alloy steel and other materials processing. With high precision quality control, and full inspection, all T550 series end mills are delivered with 100% qualification rate.
| Material |
YL10.2 / K30 |
| WC |
90% |
| Co |
10% |
| TRS |
>4100N/mm2 |
| Hardness |
>92HRA |
| Cutting diameter |
1-20mm |
| A.O.L |
50-100mm |
| Grain size |
0.8 μm |
| Helix angle |
30° |
| Upto |
HRC60 |
| Flutes No |
4 Flutes |
| Coating |
no |
| Suitable for |
Steel,stainless steel,nickel alloy,Titanium alloy,cast iron,plastic and other materials |
Standard Sizes
| Name |
Size |
Slot Thickness |
| T-Slot End Mills/Milling cutters |
φ3*φ4*50-4T |
0.5/1/1.5/2 |
| φ4*50-4T |
0.5/1/1.5/2 |
| φ6*50-4T |
0.5/1/1.5/2/2.5/3 |
| φ8*50-4T |
0.5/1/1.5/2/2.5/3 |
| φ10*60-4T |
1/1.5/2/2.5/3/4/5 |
| φ12*60-4T |
1/1.5/2/2.5/3/4/5 |
Features you should know
1.Designed to machine tool steel,alloy steel,mold steel,and other high hardened materials;
2.Suitable for aluminum,aluminum alloy,copper&non-ferrous materials;
3.Designed for HRC45-55 and HRC60;
4.High quality with reasonable price;
5.Rapid delivery;
Our services
1. Customers send detailed inquiry to us by email;
2.We reply with price, specifications, packing, photos, and other details;
3. Both of us agree the price and confirm the details;
4.We write the proforma invoice and send to customers;
5.Customers make deposit;
6.We make mass production samples;
7.We send mass product samples or send photos to customers for approval;
8.Customers confirm the mass production samples;
9.We start mass production.(we have huge stock for most standard end mills);
10. We show ready products' photos or customers inspect on site;
11.Customers make balance payment;
12.Delivery is arranged. Feedback from customers for better work in future.
Your message must be between 20-3,000 characters!