Product Description
Finishing High Performance Carbide End Mills Fine Grain Flexible Strength
KTC Tungsten Carbide End Mills for Aluminum
Specifications:
Aluminum End Mills Suitable for use in both low and high speed machining applications. Suitable for slotting or profiling, will assist in the reduction of chatter. Reduced chatter will increase tool life, produce a higher quality part, and optimize cutting efficiencies.
A380 high gloss aluminum milling cutter series adopt domestic high-quality fine grain tungsten steel material, flexural strength: 4100mpa, grain size: 0.8 μm, not easy to break the edge. A new special aluminum milling cutter with color coating is introduced, which increases the wear resistance of the cutter. The unique groove design and the polishing treatment of the front cutting edge and groove are adopted to increase the cutting performance. It is especially suitable for efficient and high gloss machining of aluminum alloy (6 and 7 series aluminum) materials. With high precision quality control, and full inspection, all A380 series end mills are delivered with 100% qualification rate.
| Raw Material |
K30 / YL10.2 |
| TRS |
>4100N/mm2 |
| Hardness |
>91HRA |
| A.O.L |
50mm-150mm |
| Grain size |
0.8 μm |
| Upto |
HRC50 |
| Flutes No |
3F |
| Suitable for |
Aluminum,plastic and other materials |
Standard Sizes
| Size |
Flute Length of End Mills(mm) |
| Aluminum Use |
| D1*D4*50 |
3 |
| D1.5*D4*50 |
5 |
| D2*D4*50 |
6 |
| D2.5*D4*50 |
8 |
| D3*D4*50 |
9 |
| D3*D3*50 |
9 |
| D3.5*D4*50 |
11 |
| D4*D4*50 |
12 |
| D1*D6*50 |
3 |
| D1.5*D6*50 |
5 |
| D2*D6*50 |
6 |
| D2.5*D6*50 |
8 |
| D3*D6*50 |
9 |
| D3.5*D6*50 |
11 |
| D4*D6*50 |
12 |
| D6*D6*50 |
15 |
| D6*D6*50 |
18 |
| D7*D8*60 |
20 |
| D8*D8*60 |
24 |
| D10*75 |
30 |
| D12*75 |
35 |
| D14*100 |
45 |
| D16*100 |
45 |
| D18*100 |
45 |
| D20*100 |
45 |
| Flute Length of Extended End Mills(mm) |
| D3*D4*75 |
12 |
| D4*D4*75 |
16 |
| D5*D6*75 |
18 |
| D6*D6*75 |
25 |
| D8*75 |
30 |
| D3*D4*100 |
15 |
| D4*D4*100 |
20 |
| D5*D6*100 |
30 |
| D6*D6*100 |
30 |
| D8*D8*100 |
35 |
| D10*100 |
40 |
| D12*100 |
45 |
| D6*D6*150 |
40 |
| D8*D8*150 |
50 |
| D10*150 |
55 |
| D12*150 |
55 |
| D14*150 |
60 |
| D16*150 |
70 |
| D18*150 |
70 |
| D20*150 |
70 |
FAQ
1. Where are your factory located? If I visit your factory, how can I go there?
Our factory located in Changzhou city, Jiangsu province.
2. What are your main products?
Our main products are carbide cutting tools, including end mill, face mill, drill bits etc.
3. What raw material you use?
We have rods with 3-4 types hardness, hrc45, hrc55, hrc60,hrc65.. Your work piece hardness decides what rods are suitable for.
5. How to ensure the quality?
We have precision detection machine, quality inspectors check cutters one by one.
6. How to deal with the cutters under verified?
These under verified cutters are all scraped.
7. I only have the drawings of work pieces? can you design cutters for me?
Yes, of course, show me work piece drawing, I will show you cutters’ drawing.
9. How long can you deliver goods?
If we have stock, goods will be shipped by next day, if not in stock, 7-35 days.
10. Can I choose the color of plastic pipe?
Yes, we have such as black, blue, red, yellow etc. color.
11. Can you make stickers with our logo and laser on cutters’ shanks?
Yes. We can print stickers with your logo and laser on shanks.
Your message must be between 20-3,000 characters!